Model No.: EMI-85W
Type: By Roll
Transparency: Transparent
Hardness: Soft
Thickness: 125um
Substrate: Pet Film
Roll Width: 700mm
Roll Length: 400m
Application: RFID
With Adhesive: Yes
Packaging: Carton
Productivity: 30000Sqm/Month
Transportation: Air,international express
Place of Origin: CN
Supply Ability: 30000Sqm/Month
HS Code: 39206900
Payment Type: T/T,Paypal,Western Union
Incoterm: FOB
This film is designed for window and LCD display anti radiation EMI shielding. Optical PET substrate deposited with a micron mesh of copper anti oxidation. Metal Mesh Pet Film can be coated with optical adhesive to stick on glass directly, or can be laminated with non adhesive film.
TECHNICAL DATA SHEET |
Physical property parameters | ||||||
item | unit | Performance Index | Detection Method | Remark | ||
EMI85W | ||||||
Thickness | Protective film | μm | 50~60 | ASTM D374 | Material:PE | |
Transparent Conductive Film | μm | 125+5 | Material:PET | |||
Adhesive | μm | 20±5 | Optical pressure sensitive adhesive | |||
| Release liner | μm | 60+5 | Material:PET | ||
Mesh shape |
| 45° |
|
| ||
Mesh width | μm | 17 |
|
| ||
Mesh spacing | μm | 255 |
|
| ||
Visible light transmittance | % | ≥81 | GB/T 2410-2008 |
| ||
Surface resistance (conductive side) | ohm | ≤0.5 | Four probe surface resistance tester |
| ||
Adhesion (conductive side) |
| At least reach two-grade | GB/T 9286-1998 |
| ||
Adhesive peel strength | g/25mm | ≥100 | GB/T 2792-1998 | For glass panel | ||
Wet-heat resistant property | Resistance variation | % | ≤30 | 65℃、90% 100hours | ΔR/R0 | |
Light transmittance change | % | ≤5 | ΔT/T0 |
SHIELDING EFFECT |
Main performance | ||||||||||||
Model | Transmittance | Frequency(DB) | ||||||||||
14K | 100K | 10M | 30M | 150M | 450M | 950M | 1G | 3G | 6G | 10G | ||
EMI-85W(85Mesh) | >81% | 8 | 9 | 30 | 40 | 63 | 50 | 45 | 45 | 35 | 30 | 25 |
APPLICATION |
All METAL MESH PET FILM products have stable resistance, very small tolerance, with super high transmittance 80%.
Deposited conductive coatings are very thin and are easily scratched or cracked if handled improperly. When removing film from a roll, care should be taken not to bend or crease it. It is important never to allow the conductive side to come in contact with a surface, such as a table, during processing operations.
COMPANY INTRODUCTION |
CANTON FAIR SHOW |
Product Categories : Conductive Film > Metal Mesh Pet Film